Open Access Open Access  Restricted Access Subscription or Fee Access

Influence of Heat Treatment on the Machinability of α+β- and Near β-Titanium Alloys


(*) Corresponding author


Authors' affiliations


DOI: https://doi.org/10.15866/ireme.v11i5.11593

Abstract


Literary data and the results of researches on the influence of various modes of heat treatment on the structure, phase composition, mechanical properties and machinability of α+β- and near  β-titanium alloys are summarized.  It is shown that heat treatment is an effective means of providing different levels of mechanical properties of alloys and defining their variable machinability.
Copyright © 2017 Praise Worthy Prize - All rights reserved.

Keywords


Heat Treatment; Machinability; Mechanical Properties; Structure; Titanium Alloys

Full Text:

PDF


References


Yu.B Egorova, S.V. Skvortsova, R.A. Davydenko, N.G. Mitropolskaya Methods for Improving the Effectiveness of Machining of Titanium and Its Alloys. Inorganic Materials: Applied Research, 2013, Vol. 4, n. 1, pp. 46-51. (In Russian)
http://dx.doi.org/10.1134/s2075113313010036

Yu.B. Egorova, Davydenko L.V., Egorov E.N., Babin S.V. Achievements in the machining of titanium and its alloys for 50 years. The technology of metals. 2015. n. 10, pp. 2-10. (In Russian)

Egorova Yu.B., R.A. Davydenko, L.V. Davydenko Classification of domestic and foreign titanium alloys machinability. Materials Science. 2014. n. 4, pp. 14-20. (In Russian)

V.A.Krivorukhov, A.V. Chubarov Machinability of titanium alloys. Moscow. Engineering. 1970. 183 p. (In Russian)

Cutting difficult materials. P.G.Petrukha [Et al.] Moscow. Engineering, 1972. 175 p. (In Russian)

N.S.Zhuchkov, P.D. Bespakhotny, A.D. Chubarov Improved machining workpieces made of titanium alloys. Moscow. Engineering, 1989.152 p. (In Russian)

Yu.B.Egorova, F.S.Mamonova, L.V. Davydenko The substantiation of quenching and aging conditions of VT23 alloy ensuring enhanced machining. Titanium'99. Science and Technology. Proceedings of 9th World Conf. On Titanium, Saint-Petersburg, 7-11 June, 1999. Vol.3. pp.1675-1678. (In Russian)

Yu.B. Egorova, N.S. Zubkov, L.V. Davydenko, L.Е. Afanasjeva. Impact of structures of titanium alloy VT6 and VT23 and their machinability. Mechanics and Physics of the processes on the surface and in contact of solid bodies, parts of technological and energy equipment. 2004. n. 1, pp. 63-66. (In Russian)

Yu.B. Egorova, N.S. Zubkov, L.V. Davydenko, L.Е. Afanasjeva. Optimization of machining titanium alloys. Herald of the Tver State Technical university. 2004. n. 4, pp.167-171. (In Russian)

Yu.B. Egorova, I.M Mamonov, L.V. Davydenko The study of correlations between the mechanical properties and machinability of alloy VT23. Proceedings (MATI Herald). 2001. n. 4 (76), pp.123-128. (In Russian)

S.G. Glazunov, V.N. Moiseev Constructional titanium alloys. Moscow. Metallurgy, 1974. 368 p. (In Russian)

Titanium alloys. Metallography of titanium alloys. E.A. Borisova [et al.] Moscow. Metallurgy, 1980. 464 p. (In Russian)

Asiura Yasuyuki, Motonisi Hide. The machinability of titanium alloys. Titanium dzirukoniumu. Titanium and zirconium. 1987. n.3, p. 131-141.

Materials Properties Handbook. Titanium Alloys. R.Boyer [et al.] ASM International. The Material Information Society. 1994, 1176 p.

M. Altug, M. Erdem, C. Ozay Experimental investigation of kerf of Ti6Al4V exposed to different heat treatment processes in WEDM and optimization of parameters using genetic algorithm [Electronic resource]. http://www.scientific.net /MSF.770.179 (reference date 23.03.2015).
http://dx.doi.org/10.1007/s00170-014-6702-x

N. Khanna, K.S. Sangwan. Comparative machinability study on Ti54M titanium alloy in different heat treatment conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.2013, January 1. Vol.227, pp. 96-101.
http://dx.doi.org/10.1177/0954405412466234

N. Khanna, K.S. Sangwan. Machinability study on α/β and β-titanium alloys in different heat treatment conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2013, March 1.Vol.227, pp. 357- 361.
http://dx.doi.org/10.1177/0954405412469509

Yu.B. Egorova, A.A. Il'in, B.A. Kolachev, V.K. Nosov, A.M. Mamonov. Effect of the Structure on the Cutability of Titanium Alloys. Metal Science and Heat Treatment. 2003.Vol.45. n. 3-4, pp.134-139. (In Russian)
http://dx.doi.org/10.1023/a:1024527807272


Refbacks

  • There are currently no refbacks.


Please send any question about this web site to info@praiseworthyprize.com
Copyright © 2005-2024 Praise Worthy Prize