Open Access Open Access  Restricted Access Subscription or Fee Access

Information Support for Automation Systems for the Organization of Construction

Natalya Viktorovna Knyazeva(1*)

(1) Federal State Budget Educational Institution of Higher Education, “Moscow State University of Civil Engineering (National Research University)”, Russian Federation
(*) Corresponding author



Systems for automation of construction management play a key role in increasing the level and the efficiency of companies that operate in investment construction sector. These systems form a part of logistics that is viewed as theory and practice of economic activities aimed at permanent perfecting of forms and methods of stream processes through introducing of logistic innovations in the existing management systems. Rapid development of information (IT) and Internet technologies reveals principally new opportunities and sources for increasing the efficiency of construction companies management. Today, business entities in construction complex of all, big and small, regions, are informal clusters where interaction in achieving a final goal – building, reconstruction, technical re-equipment or upgrade - is impossible without the latest technologies, innovative method of communication and management in construction processes management.
Copyright © 2017 Praise Worthy Prize - All rights reserved.


Construction Operations; Automation System; Information Support; Management Efficiency; Logistic Complex

Full Text:



T. Janssen, Under the Hood of the Organization Enterprise Engineering: Sustained Improvement of Organizations (Cham: Springer International Publishing, 2016), pp. 19-53.

A.A. Volkov, S.N. Petrova, A.V. Ginzburg. Information systems and technologies in construction: textbook. M-in education and science Ros. The Federation, Moscow. State. Builds. Un-t. Moscow: MSSU, 2015. 424 p. ISBN 978-5-7264-1032-6.

I. Y. Paramonov Model of the Accounting of Value and Aging of Information at Estimation of Efficiency of Functioning of Systems of Information Support. Systems of Control, Communication and Security, 2016, no. 1, pp. 328-334. Available at: (accessed 3 July 2017).

M. Farwick, C. M. Schweda, R. Breu, and I. Hanschke, A situational method for semi-automated Enterprise Architecture Documentation. Software & Systems Modeling, 15(2), 397-426, 2016.

N. Y. Jadhav, Building Management and Automation Technologies Green and Smart Buildings: Advanced Technology Options (Singapore: Springer Singapore, 2016), pp. 95-107.

B. Mrugalska, M. Wyrwicka, and B. Zasada, Human-Automation Manufacturing Industry System: Current Trends and Practice in F. Rebelo & M. Soares (Eds.), Advances in Ergonomics in Design: Proceedings of the AHFE 2016 International Conference on Ergonomics in Design, July 27-31, 2016, Walt Disney World®, Florida, USA, pp. 137-145. (Cham: Springer International Publishing, 2016).

E. L. Itskovich, Basics of MES construction concept for production industries. Automation and Remote Control, 77(11), 2035-2043, 2016.

Z. Pezeshki, and S. A. S. Ivari, Applications of BIM: A Brief Review and Future Outline. Archives of Computational Methods in Engineering, 1-40, 2016.

V. V. Ilin Implementation of ERP-systems: management of economic efficiency [Electronic resource]: practical. El. Edition / V.V. Ilyin .- 2 nd ed. (El.) .- M.: Intermediator, 2015 .- 298 p. - Derivative email. Ed. On the basis of the printed ed. ([Saarbrϋcken]: LAP Lambert Academic Publishing, 2012) .- ISBN 978-3-659-31061-4.

I. V. Pustokhin. Evaluation of the models of process management from the point of view of the possibilities and limitations of their use in the formation and management of supply chains in logistics clusters // Internet journal "NAUKOVODENIE" Volume 7, №2 - 2015. 1-16 s.

V. G. Ryabtsev, T. Yu. Utkina Information Technology of Design of Automated Systems Control of Technological Processes. Systems of Control, Communication and Security, 2016, no. 1, pp. 207-239. Available at: (accessed 3 July 2017).

S. Underwood, D. Bartz, A. Kade, and M. Crawford, Truck Automation: Testing and Trusting the Virtual Driver. In G. Meyer & S. Beiker (Eds.), Road Vehicle Automation 3, pp. 91-109(Cham: Springer International Publishing, 2016).

B. S. Chetverikov, M. S. Chepchurov, and I. A. Teterina, Automation of component selection of ball-bearing support of drilling bit. The International Journal of Advanced Manufacturing Technology, 1-7, 2016.

V. I. Ukhov, and I. O. Kovtsova, Organization of energy resource monitoring on the basis of XML protocol. Automation and Remote Control, 77(6), 1122-1128, 2016.

J. Korelc, and P. Wriggers, Automation of Research in Computational Modeling Automation of Finite Element Methods, pp. 29-68. (Cham: Springer International Publishing, 2016).

M. Heins, C. Cone, J. Ferguson, R. Cao, J. Pond, J. Klein, K. Nesmith, Design Flow Automation for Silicon Photonics: Challenges, Collaboration, and Standardization in L. Pavesi, and D.J. Lockwood (Eds.) Silicon Photonics III: Systems and Applications, pp. 99-156. (Berlin, Heidelberg: Springer Berlin Heidelberg, 2016).

S. Shanmugapriya, K. Subramanian, Developing a PLS path model to investigate the factors influencing safety performance improvement in construction organizations. KSCE Journal of Civil Engineering, 20(4), 1138-1150, 2016.

E. C. Cordeiro, G. F. Barbosa, L. G. Trabasso, A customized QFD (quality function deployment) applied to management of automation projects. The International Journal of Advanced Manufacturing Technology, 87(5), 2427-2436, 2016.

W. V. Seelen, and K. Behrend, Principles of Neural Information Processing Principles of Neural Information Processing, pp. 1-102. (Cham: Springer International Publishing, 2016).

M. Himanen, The Significance of User Involvement in Smart Buildings Within Smart Cities in V. Angelakis, E. Tragos, H.C. Pöhls, A. Kapovits, and A. Bassi (Eds.) Designing, Developing, and Facilitating Smart Cities: Urban Design to IoT Solutions,pp. 265-314. (Cham: Springer International Publishing, 2017).

A. Kučera, and T. Pitner, Semantic BMS: Ontology for Analysis of Building Automation Systems Data in L.M. Camarinha-Matos, A.J. Falcão, N. Vafaei, and S. Najdi (Eds.) Technological Innovation for Cyber-Physical Systems: 7th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2016, Costa de Caparica, Portugal, April 11–13, 2016, Proceedings, pp. 46-53. (Cham: Springer International Publishing, 2016).

S. Lee, and J. Yu, Discriminant model of BIM acceptance readiness in a construction organization. KSCE Journal of Civil Engineering, 21(3), 555-564, 2017.

J. Cho, T. Vosgien, T. Prante, and D. Gerhard, KBE-PLM Integration Schema for Engineering Knowledge Re-use and Design Automation in R. Harik, L. Rivest, A. Bernard, B. Eynard, and A. Bouras (Eds.) Product Lifecycle Management for Digital Transformation of Industries: 13th IFIP WG 5.1 International Conference, PLM 2016, Columbia, SC, USA, July 11-13, 2016, Revised Selected Papers, pp. 43-55. (Cham: Springer International Publishing, 2016).

S. Srinivasan, S. Smith, and D. Milakis, Implications of Vehicle Automation for Planning in G. Meyer, and S. Beiker (Eds.) Road Vehicle Automation 3, pp. 287-295. (Cham: Springer International Publishing, 2016).

B.L. Stringam, T. Gill, and B. Sauer, Integration of irrigation district personnel with canal automation projects. Irrigation Science, 34(1), 33-40, 2016.


  • There are currently no refbacks.

Please send any questions about this web site to
Copyright © 2005-2017 Praise Worthy Prize